SB Acoustics

(Made in Indonesia )

http://www.sbacoustics.com/

アップされている以外のユニットも販売しています。 お問い合わせください。

保証期間 1年間(メーカー規定範囲のみ)

SB Acoustics ペーパーコーン振動板(ハピルス含有)全てに言えることですが、やわらかく耳触りが良い(ScanSpeak Revelator類似、音の賓はScanSpeakが上)のですが情報量は少なめです。

やはり価格相応と思います。(Satoriは除く)


Satori TW29B-B Beryllium Dome Tweeter(フェライトタイプ)

 

   

     

http://www.sbacoustics.com/index.php/products/tweeters/dome/satori-tw29b-b/

  

 

販売価格はお問い合わせください。



Satori MW19PNW-8ohm White Egyptian Reed Cone Woofer


販売価格はお問い合わせください。

 


Satori TW29BN-B Beryllium Dome Tweeter(Black Face Plate)
tw29bnb

販売価格は問い合わせください。


Satori WO24P-8 9.5inch Egyptian Papyrus Cone Woofer

image 



販売価格は問い合わせください。


SB17CRC35-04(08) 6inch Woven Carbon Fiber Cone Woofer

sb17c3504


待望のCarbon fibre sandwich cone ウーハーがやっと販売されました。
カー/ホームオーディオにいかかですか。
ペーパーコーンより音質、情報量とも遥かにアップしています。
販売価格はお問いあわせください。

7.5inch MIDWOOFER(SATORI)

 
mw19pmw19p


 とても良く出来たウーハーです。ハイエンドーウーハーです。
(個人的にはS.S midwooferより完成度が高いと思います)

Satori TW29RN Ring Dome Tweeter with Neodymium Magnet System

tw29mtw29m
販売価格はお問い合わせください。

New Satori MW13P(8ohm,4ohm) 5inch Woofer (Egyptian Papyrus Cone )

mw13p
mw13p

   販売価格はお問い合わせください。

SB23NACS45-8 8inch Aluminum Cone Woofer

SB23NACS45

New  
34NRXL75-8
 
 
 販売価格はお問い合わせください。

Satori TW29R Ring Dome Tweeter

販売価格はお問い合わせください。

http://www.sbacoustics.com/index.php/products/tweeters/satori-tw29r/


SB17MFC35-8 6" Polypropylene Cone Woofer - 8 ohm

  • Vented cast aluminium chassis for optimum strength and low compression
  • Mineral filled PP-cone made in-house
  • Soft low damping rubber surround for improved transient response
  • Non-conducting fibre glass voice coil former for minimum damping
  • Extended copper sleeve on pole piece for low inductance and low distortion
  • CCAW voice coil for reduced moving mass
  • Long life silver lead wires
  • Vented pole piece for reduced compression

販売価格はお問い合わせください。


SB15MFC30-8 5" Polypropylene Cone Woofer - 8 ohm

SB15MFC30

 

  • Vented cast aluminium chassis for optimum strength and low compression
  • Mineral filled PP-cone made in-house
  • Soft low damping rubber surround for improved transient response
  • Non-conducting fibre glass voice coil former for minimum damping
  • Extended copper sleeve on pole piece for low inductance and low distortion
  • CCAW voice coil for reduced moving mass
  • Long life silver lead wires
  • Vented pole piece for reduced compression

販売価格はお問い合わせください。


SatoriMW16P Woofer

Satori drivers are designed for subtlety and realism.

http://www.sbacoustics.com/index.php/products/midwoofers/6-1-2-satori-mw16r/

  • For a sealed box try 0.3 cubic foot (8.5 liters) with 50% filling for an F3 of about 73Hz.
  • In 1/2 cubic foot (14 liters) with a 1.5inch vent by 7inch long your F3 is about 50Hz.
  • In 0.7 cubic foot (20 liters) with a 2inch vent by 7inch long your F3 is about 42Hz.
原音に忠実で情報量も多く、重低音再生もなかなか秀逸です。
 
重低音再生を得意とするフルレンジ (8ohm type)といってもよいくらいです。

販売価格はお問い合わせください。

ScanSpeak Illuminator Wooferより良いと言うマニアもいます。

SB12MNRX25-04

 

http://www.sbacoustics.com/index.php/products/midrange-drivers1/midrange-drivers/

販売価格はお問い合わせください。


 SB29SWNRX-S75-6

http://www.sbacoustics.com/index.php/products/woofers/10-sb29swnrx-s75-6/

販売価格はお問い合わせください。


SB34SWNRX-S75-6

http://www.sbacoustics.com/index.php/products/woofers/12-sb34swnrx-s75-6/

販売価格はお問い合わせください。


SB15NRXC30-8-UC ( Uncoated Cone ) 5" Woofer

http://www.sbacoustics.com/index.php/products/midwoofers/5-sb15nrxc30-8/

販売価格はお問い合わせください。


SB17NRXC35-8-UC( Uncoated Cone )6.5"Woofer

http://www.sbacoustics.com/index.php/products/midwoofers/6-sb17nrxc35-8/

販売価格はお問い合わせください。


SB12NRXF25-4

 4" midrange - 4 ohm

 

販売価格はお問い合わせください。

 スペック

http://sbacoustics.com/index.php?link=products_detail&nop=1&noc=14

 


 SB29RDC-C000-4

Ring Dome tweeter

 

販売価格はお問い合わせください。

スペック

http://sbacoustics.com/index.php?link=products_detail&nop=1&noc=25

Vifa XT25TG30-04 1" Ring Radiator Tweeter

より音が良いといわれ始めています。

 

SB23NRXS45-8

8" Woofer

販売価格はお問い合わせください。

スペック

http://sbacoustics.com/index.php?link=products_detail&nop=1&noc=17


SB42FHC75-6

15" Woofer

§  Cone has paper honeycomb structure with fiberglass

§  Rigid cast frame with large windows

§  rubber surround

§  93.5dB Efficiency

§  3" diameter voice coil

§  11.5mm peak linear excursion (x-max)

§  Ventilated spider and vented pole piece

§  300 Watt power handling

Large cone drivers often experience problems with the cone material changing shape while being driven. 

 There is always a compromise between a rigidity and lightness of the cone.

  SB Acoustics has solved this problem by using a rigid honeycomb structure made from paper and then covered it

 with a thin membrane of fiberglass.  The result is a very rigid and light cone with minimized cone distortion.

The voice coil is ventilated below the spider and through the pole piece.

  This increases power handling and reduces mechanical noise.

  The cast frame has been engineered for minimum reflections and maximum air flow. 

Nominal Impedance 6 ohm
DC Resistance (Re) 4.6 ohm
Sensitivity (2.83V/1M) 93.5dB
Power handling 300W
Voice Coil diameter 75.6mm (3")
Voice coil length 31mm
Air gap height 8mm
Linear excursion peak (x-max) 11.5mm
Magnet wieght 3.5kg (7.71 lb)
Net Weight 10.2kg (22.5 lb)

Resonance Frequency (Fs) 22Hz
Effective surface area (Sd) 843.68 cm2
Magnet flux density 1.02T
Qms 7.0
Qes 0.4
Qts 0.38
Mms 165 g
Bl 16 Tm
Vas 320 liters
Cms 0.32 mm/N
Rms 3.1kg/s

Dimensions:
Flange diameter 417mm (16.42")
Cut out diameter 371mm (14.6mm)
Depth 170.3mm (6.7")
Flange thickness 10mm (0.39")
Screw hole mounting diameter 395mm (15.55")
Screw head diameter 10.5mm
Screw hole size 5.5mm

Box suggestion:

Sealed box of 3.0 cubic feet with stuffing has and F3 of 45Hz and F6 of 34Hz

Vented box of 5.0 cubic feet with stuffing and 4" diameter vent by 7" long has an F3 of 32Hz.

販売価格はお問い合わせください。

10日前後で輸入します。


SB15NRXC30-8

5" Woofer

§  Non-resonant coated Papyrus fiber cone

§  Low damping SBR surround

§  Open structure cast frame for reduced reflections

§  Copper cap on pole piece

§  Raised spider

§  30mm Voice Coil diameter

§  Frequency range 38Hz to 4kHz

§  Gasket

Specifications

 

§  Impedance 8Ω

§  Net Weight 1.48Kg

§  Voice Coil Diameter 30.5mm

§  Magnet Gap Flux Density 1.0T

§  Free Air Resonance 38Hz

§  Qms 4.8

§  Qts 0.33

           §  Power Handling 50W

 Dimensions:
Flange diameter: 150mm
Cut out diameter: 120mm
Depth: 68.3mm
Flange thickness: 7mm
Screw mounting diameter: 138mm
Screw hole size: 4.3mm

Sealed box of 0.15 cubic feet for and F3 of 100Hz

Vented box of 0.35 cubic feet with a 2" diameter vent by 6" long for an F3 of 55Hz.

 詳しくは

http://sbacoustics.com/specproduct.php?product_name=5 SB15NRXC30-8

販売価格はお問い合わせください。

10日前後で輸入します。


SB17NRXC30-8

6" Woofer

 

 

§  Non-resonant coated Papyrus fiber cone

§  Low damping SBR surround

§  Open structure cast frame for reduced reflections

§  Copper cap on pole piece

§  Raised spider

§  35mm Voice Coil diameter

§  Frequency range 38Hz to 3.5kHz

§  Gasket

Specifications

 

§  Impedance 8Ω

§  Net Weight 1.56Kg

§  Voice Coil Diameter 35.52mm

§  Magnet Gap Flux Density 0.97T

§  Free Air Resonance 33Hz

§  Qms 5.8

§  Qts 0.33

§  Sensitivity 89db

  §  Power Handling 60W

Dimensions:
Flange diameter: 171mm
Cut out diameter: 139.5mm
Depth: 74.9mm
Flange thickness: 7mm
Screw mounting diameter: 159mm
Screw hole size: 4.3mm

Sealed box of 0.3 cubic feet for and F3 of 77Hz

Vented box of 0.6 cubic feet with a 2" diameter vent by 8" long for an F3 of 50Hz.

 詳しくは

http://sbacoustics.com/specproduct.php?product_name=6 SB17NRXC35-8

販売価格はお問い合わせください。

10日前後で輸入します。

 

SB29NRX75-6

10" Woofer

§  Hard paper cone

§  Low damping SBR surround

§  Open structure cast frame for reduced reflections

§  Raised spider

§  75mm Voice Coil diameter

§  Frequency range 22Hz to 900Hz

§  Gasket

Specifications

§  Impedance 8Ω

§  Net Weight 5.3Kg

§  Voice Coil Diameter 75.55mm

§  Magnet Gap Flux Density 0.87T

§  Free Air Resonance 21Hz

§  Qms 5.7

§  Qts 0.35

§  Sensitivity 88db

   §  Power Handling 200W

Sealed box of 0.8 cubic feet for and F3 of 48Hz

Vented box of 2.0 cubic feet with a 3" diameter vent by 12" long for an F3 of 28Hz.

 

詳しくは

http://sbacoustics.com/specproduct.php?product_name=10 SB29NRX75-6

販売価格はお問い合わせください。

10日前後で輸入します。


SB34NRX75-6

12" Woofer

§  Hard paper cone

§  Low damping SBR surround

§  Open structure cast frame for reduced reflections

§  Raised spider

§  75mm Voice Coil diameter

§  Frequency range 19Hz to 1kHz

§  Gasket

Specifications

§  Impedance 6Ω

§  Net Weight 5.85Kg

§  Voice Coil Diameter 75.6mm

§  Magnet Gap Flux Density 0.9T

§  Free Air Resonance 19Hz

§  Qms 5.1

§  Qts 0.40

§  Sensitivity 90db

       §  Power Handling 200W

Dimensions:
Flange diameter: 346.2mm
Cut out diameter: 300.2mm
Depth: 141.8mm
Flange thickness: 11mm
Screw mounting diameter: 324.2mm
Screw hole size: 5.5mm

Sealed box of 2.6 cubic feet for and F3 of 38Hz

Vented box of 4.0 cubic feet with a 3" diameter vent by 10" long for an F3 of 27Hz.

 詳しくは

http://sbacoustics.com/specproduct.php?product_name=12 SB34NRX75-6

販売価格はお問い合わせください。

10日前後で輸入します。


SB25STC-C000-4

Textile Dome Tweeter

§  Optimized polymer face plate

§  25mm fabric dome

§  copper pole shorting ring

§  Pole piece diffuser with venting

§  Gold plated terminals (wider terminal is positive)

§  Frequency range 1500Hz to 23kHz

§  Very good off axis response

§  Large terminal is positive, small one is negative

§  Specifications

 §  Impedance 4Ω

§  Net Weight 0.5Kg

§  Voice Coil Diameter 25.4mm

§  Magnet Gap Flux Density 1.25T

§  Free Air Resonance 680Hz

§  Qms 2.0

§  Qts 0.80

§  Sensitivity 91db

Dimensions

 Face plate diameter: 100mm
Cut out diameter: 70mm (notch for terminals)
Depth: 33.2mm
Flange thickness: 4mm
Screw position radius: 88.5mm
Screw hole: 4mm

 詳しくは

 http://sbacoustics.com/specproduct.php?product_name=SB25STC-C000-4

販売価格はお問い合わせください。

10日前後で輸入します。